TBIL-Cal Limits Numerically (LT2)

tends to 2. Now let us say you are also given a table of numerical values (Table 8) for the function. Given this new information which of the choices below best describes the limit of the function as

x

tends to 2?

There is not enough information because we do not know the value of the function at $x = 2 .$
The limit can be approximated to be 1 because the data in the table and the graph show that from the left and the right the function approaches 1 as $x$ goes to 2.
The limit can be approximated to be 1 because the values appear to approach 1 and the graph appears to approach 1, but we should zoom in on the graph to be sure.
The limit cannot be approximated because the function might not exist at $x = 2 .$

🔗

Activity 1.2.4.

Table 9.

$x$	$0.9$	$0.99$	$0.999$	$1$	$1.001$	$1.01$	$1.1$
$f (x)$	$- 0.4$	$- 0.49$	$- 0.499$	$?$	$0.499$	$0.49$	$0.4$

🔗

Based on Table 9, what information can be inferred about

lim_{x \to 1^{-}} f (x),

lim_{x \to 1^{+}} f (x),

and

lim_{x \to 1} f (x) ?

$lim_{x \to 1^{-}} f (x) = - 0.5, lim_{x \to 1^{+}} f (x) = 0.5,$ and $lim_{x \to 1} f (x) = 0$
$lim_{x \to 1^{-}} f (x) = - 0.5, lim_{x \to 1^{+}} f (x) = 0.5,$ and $lim_{x \to 1} f (x)$ does not exist
$lim_{x \to 1^{-}} f (x) = 0.5, lim_{x \to 1^{+}} f (x) = - 0.5,$ and $lim_{x \to 1} f (x)$ does not exist
$lim_{x \to 1^{-}} f (x) = 0.5, lim_{x \to 1^{+}} f (x) = - 0.5,$ and $lim_{x \to 1} f (x) = 0$

🔗

Activity 1.2.5.

🔗

Consider the following function

f (x) = 3 x^{3} + 2 x^{2} - 5 x + 20.

🔗

(a)

🔗

Of the following options, at which values given would you evaluate

f (x)

to best determine

lim_{x \to 2} f (x)

numerically?

1.9, 1.99, 2.0, 2.01, 2.1
1.98, 1.99, 2.0, 2.01, 2.02
1.8, 1.9, 2.0, 2.1, 2.2
1.0, 1.5, 2.0, 2.5, 3.0

🔗

(b)

🔗

Use the values that you chose in part (a) to calculate an approximation for

lim_{x \to 2} f (x) .

🔗

(c)

🔗

Which value best describes the limit that you obtained in part (b)?

The approximate value is 41.25
The approximate value is 41.5
The approximate value is 41.75
The approximate value is 42

🔗

Activity 1.2.6.

🔗

In Figure 10 is the graph for

f (x) = \sin (\frac{1}{x}) .

Several values for

f (x)

in the neighborhood of

x = 0

are approximated in Table 11.

Figure 10. Graph of $f (x) = \sin (1 / x) .$

Table 11.

$x$	$- 0.1$	$- 0.01$	$- 0.001$	$0$	$0.001$	$0.01$	$0.1$
$f (x)$	$0.54402$	$0.50637$	$- 0.82688$	$?$	$0.82688$	$- 0.50637$	$- 0.54402$

🔗

(a)

🔗

Based on the graph and table what is the best explanation for the limit as

x

tends to zero?

The limit does not exist because the left and right limits have opposite values.
The limit does not exist because we do not have enough information to answer the question.
The limit does not exist because the function is oscillating between -1 and 1.
The limit does not exist because you are dividing by zero when $x = 0$ for $f (x) .$

🔗

(b)

🔗

Would your conclusion that resulted from Activity 1.2.6 change if the function was

f (x) = \cos (1 / x)

f (x) = \tan (1 / x) ?

🔗

Activity 1.2.7.

🔗

Use technology to complete the following table of values.

f (x) = \frac{x^{2} - x - 12}{x^{2} + 16 x + 39}

\begin{array}{cccccccc} x & - 3.1 & - 3.01 & - 3.001 & - 3 & - 2.999 & - 2.99 & - 2.9 \\ f (x) \end{array}

🔗

Then explain how to use it to make an educated guess as to the value of the limit

lim_{x \to - 3} \frac{x^{2} - x - 12}{x^{2} + 16 x + 39}

🔗

Activity 1.2.8.

🔗

In this activity you will study the velocity of Usain Bolt in his Beijing 100 meters dash. He completed 100 meters in 9.69 seconds for an overall average speed of 100/9.69 = 10.32 meters per second (about 23 miles per hour). But this is the average velocity on the whole interval. How fast was he at different instances? What was his maximum velocity? Let’s explore this. The table Table 12 shows his split times recorded every 10 meters.

Table 12.

$t (seconds)$	$1.85$	$2.87$	$3.78$	$4.65$	$5.5$	$6.32$	$7.14$	$7.96$	$8.79$	$9.69$
$d (meters)$	$10$	$20$	$30$	$40$	$50$	$60$	$70$	$80$	$90$	$100$

🔗

(a)

🔗

What was the average velocity on the first 50 meters? On the second 50 meters?

🔗

(b)

🔗

What was the average velocity between 30 and 50 meters? Between 50 and 70 meters?

🔗

(c)

🔗

What was the average velocity between 40 and 50 meters? Between 50 and 60 meters?

🔗

(d)

🔗

What is your best estimate for the Usain’s velocity at the instant when he passed the 50 meters mark? This is your estimate for the instantaneous velocity.

🔗

(e)

🔗

Using the table of values, explain why 50 meters is NOT the best guess for when the instantaneous velocity was the largest. What other point would be more reasonable?

🔗

Subsection 1.2.2 Videos

🔗

Figure 13. Video for LT2

🔗

Subsection 1.2.3 Exercises

🔗

Exercises available at https://tbil.org/calculus/preview/exercises/#/bank/LT2/

Prev Top Next